-
1 ambient air temperature
Automobile industry: AATУниверсальный русско-английский словарь > ambient air temperature
-
2 температура окружающего воздуха
Русско-английский научно-технический словарь Масловского > температура окружающего воздуха
-
3 температура окружающего воздуха
Русско-английский глоссарий по космической технике > температура окружающего воздуха
-
4 температура окружающего воздуха
температура окружающего воздуха
Определенная в предписанных условиях температура воздуха, окружающего весь коммутационный аппарат или предохранитель.
МЭК 60050(441-11-13).
Примечание. Для коммутационных аппаратов или предохранителей, установленных внутри оболочки, — это температура воздуха вне оболочки.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
ambient air temperature
the temperature, determined under prescribed conditions, of the air surrounding the complete switching device or fuse
NOTE – For switching devices or fuses installed inside an enclosure, it is the temperature of the air outside the enclosure.
[IEV number 441-11-13 ]FR
température de l'air ambiant
température déterminée dans des conditions prescrites de l'air qui entoure la totalité de l'appareil de connexion ou du fusible
NOTE – Pour des appareils de connexion ou des fusibles installés à l'intérieur d'une enveloppe, c'est la température de l'air à l'extérieur de l'enveloppe
[IEV number 441-11-13 ]Тематики
- аппарат, изделие, устройство...
EN
DE
FR
3.5.6 температура окружающего воздуха (ambient air temperature): Температура, определяемая в заданных условиях воздуха, окружающего УЗО.
[МЭК 60050 (441-11-13), модифицированный]
Примечание - Для УЗО, помещенного в оболочку, это температура внутри оболочки.
Источник: ГОСТ Р МЭК 60755-2012: Общие требования к защитным устройствам, управляемым дифференциальным (остаточным) током оригинал документа
3.2.10.1 температура окружающего воздуха (ambient air temperature): Определенная в предписанных условиях температура воздуха, окружающего автоматический выключатель (для автоматического выключателя, заключенного в оболочку, это температура воздуха вне оболочки).
[МЭС 441-11-13]
Источник: ГОСТ Р 50345-2010: Аппаратура малогабаритная электрическая. Автоматические выключатели для защиты от сверхтоков бытового и аналогичного назначения. Часть 1. Автоматические выключатели для переменного тока оригинал документа
3.1.30 температура окружающего воздуха (ambient air temperature): Определенная при предписанных условиях температура воздуха, окружающего коммутационный аппарат.
Источник: ГОСТ Р 54828-2011: Комплектные распределительные устройства в металлической оболочке с элегазовой изоляцией (КРУЭ) на номинальные напряжения 110 кВ и выше. Общие технические условия оригинал документа
3.1.6 температура окружающего воздуха (ambient airtemperature): Температура воздуха, определенная при заданных условиях, которая окружает весь коммутационный аппарат или предохранитель.
[МЭК 60050(МЭС 441-11-13)]
Примечание - Для коммутационных аппаратов или предохранителей, установленных внутри оболочки - температура воздуха вне оболочки.
Источник: ГОСТ Р 51731-2010: Контакторы электромеханические бытового и аналогичного назначения оригинал документа
Русско-английский словарь нормативно-технической терминологии > температура окружающего воздуха
-
5 температура (темп.)
temperature (temp.)
-, абсолютная — absolute temperature
temperature value relative to absolute zero.
- атмосферного воздуха — free-air temperature
- аэродинамического нагрева — aerodynamic heat temperature
- в верхних слоях атмосферы — upper air temperature
- воздуха в трубопроводе (сист. кондиционирования) — duct (air) temperature
- воздуха на входе в двигатель — engine air inlet temperature, ram air temperature (rat)
- воздуха на входе в карбюратор — carburetor air (inlet) temperature
- воздуха перед карбюратором — carburetor air inlet temperature
- воспламенения — ignition temperature
минимальная температура, потребная для воспламенения или поддерживания горения вещества (топлива), — the minimum temperature required to ignite or cause self-sustained combustion of a substance.
- вспышки — flashpoint
температура, при которой образуются пары топлива или масла, мгновенно воспламеняющиеся при зажигании. — the temperature at which а substance, as fuel, oil will give off а vapor that will flash or burn momentarily when ignited.
- входящего масла (в двиг.) — oil inlet temperature (oil-in temp)
- выходящего масла (из двиг.) — oil outlet temperature (oil-out temp)
- выходящих газов (за турбиной) (твг) — exhaust gas temperature (egt), turbine gas temperature (tgt)
замер твг производится термопарой, установленной в реактивном сопле. — egt measurement uses the average signal from thermocouple-type probes located in the turbine exhaust.
- выходящих газов (твг-т4 без учета промежуточных температур перед и за турбинами вд и нд) — egt/tgt/ (т4)
- выходящих газов (твг-t7 с учетом промежуточных температур газов перед и за турбинами вд и нд) — egt/tgt/ (т7)
- выходящих газов, опасная (выше нормы) — exhaust gas overtemperature (еg ovtmp)
- выходящих газов, приведенная к мса — exhaust gas temperature (given) in l.s.a., egt based on isa conditions
- газов за турбиной — exhaust gas temperature (egt), turbine gas temperature (tgt)
немедленно прекращать запуск при забросе твг. — discontinue the start immediately after an indication of egt rise.
- газов за турбиной вд (т5) — hp turbine (exhaust) gas temperature (т5)
- газов за турбиной нд (т6) — lp turbine (exhaust) gas temperature (т6)
- газов за турбиной (в удлинительной трубе) — jet pipe temperature (jpt)
- газов за турбиной по прибору, максимальная — maximum observed egt
- газов на входе в турбину — turbine inlet temperature, turbine entry temperature (tet)
приборы силовой установки включают указатели оборотов (газогенератора) и температуры газов на входе в турбину. — engine indicating consists of the gas generator rpm indigating system and power turbine inlet temperature indicating system.
- газов на выходе из турбины — exhaust gas temperature (egt)
- газов перед турбиной — turbine inlet temperature
- газов перед турбиной вд (с учетом промежуточных температур газов перед и за турбинами вд и нд) (т4) — hp turbine inlet temperature (т4)
- головок цилиндров — cylinder head temperature (cyl. hd temp, cut)
- горения — combustion temperature
- дня — day temperature
-, заданная (выставляемая) — selected temperature
-, заданая (по усповию) — pre-determined temperature
- замерзания — treezing point
- заторможенного потока — stagnation temperature
-, заявленная — declared temperature
-, комнатная — normal raom temperature
- масла — oil temperature
- масла, минимально-допустимая для запуска (дв.) на земле и в воздухе — minimum oil temperature for starting and relighting
- масла, минимально-допустимая для дачи газа — minimum oil temperature before advancing the throttle
- масла на входе в двигатель — (engine) oil inlet temperature (oil-in temp)
- масла на выходе из двигателя — (engine) oil outlet temperature (oil-out temp)
- масла, низкая (недостаточная) — oil undertemperature
табло "мала темп. масла" загорается при падении темп. масла более чем на 10 ос ниже допустимой средней величины. — the oil under temp light comes on when oil temperature more than 10о c below average.
-, местная — local temperature
-, минусовая — subzero temperature
engine start after prolonged cold soak periods at subzero temperatures.
- на аэродроме — aerodrome temperature
- на аэродроме (на графике) — air temperature
- набегающего потока — ram air temperature (rat)
- (воздуха) на входе в двигатель — engine air inlet temperature
- на выходе из компрессора — compressor delivery temperature
- наружного воздуха ( hb) — outside/ambient, free ram/ air temperature (0.a.t., oat), free air static temperature
- на уровне моря — sea-level temperature
- невозмущенного потока (воздуха) — static air temperature
- окружающего воздуха — ambient (air) temperature
включить пос при наличии мокрого снега при т. окружающего воздуха ниже +10 ос — turn engine anti-ice on if wet snow is present with ambient air temperature below +10 ос.
- окружающего воздуха (на графике) — air temperature
- окружающей среды — ambient temperature
-, опасная — overtemperature (ovtmp)
- от -40 до (+) 50 ос — temperature (range) from to +50 ос
- относительно мса (на графике) — (incremental) temperature above and below isa, temperature deviation from isa
- пайки — soldering temperature
-, повышенная — elevated temperature
- пограничного слоя — boundary layer temperature
-, полная (торможения потока) — total air temperature (tat)
температура высокоскоростного потока воздуха, адиабатически заторможенного до нулевой скорости на передней кромке азродинамического профиля. — the "ram" temperature ereated on the leading edges of an aircraft traveling through the atmosphere. refers to the complete standstill of air molecules on the leading edgas of the aircraft.
- полного торможения (воздушного потока) — stagnation /total/ tamperature
-, постоянная — constant temperatufa
-, предполагаемая в эксплуатации — temperature expected in service
-, равновесная — equilibrium temperature
- самовоспламенемия — autoignition temperature
expected autoignition temperatura of the fuel in the tanks.
- сгорания — combustion temperature
-, стандартная — standard temperature
-, статическая — static temperature
- топлива — fuel temperature
- топлива, низкая (недостаточная) — fuel undertemperature
табло "мала темп. топлива" загорается при cниженин. — the fuel under temp light comes on during descent.
- торможения (воздушного потока) — stagnation /total/ temperature
- тормоза (колеса) — brake temperature
brake temp (amber) annunciator is lit when brakes are overheating
- точки росы — dewpoint (temperature)
температура, до которой необходимо охладить воздух или др. газ, чтобы содержащийся в нем водяной пар достиг состояния насыщения. — the temperature to which a given parcel of air must be cooled at constant pressure and constant water vapor content in order for saturation to occur.
высока т. в воздухопроводе (табло системы отбора воздуха от двигателя) — (air) duct ovht engine bleed air dueting is overheated.
высока т. воздуха (охлаждения) турбины (дв. n i) (табло) — turb air ovht (eng i) engine turbine cooling air is overheated (overtemperature).
высока т. газов турбины (табло) — overtemp tgt turbine gas temperature (tgt) is over temperature.
высока т. масла в... — (too) high temperature of oil in..., high oil temperature in...
высока т. масла 1-ro двигателя (табло) — (eng) i oil over temp, oil ovtemp, oil ovht indicates excessive oil temperature.
"высока т. раб. жидкости (в гидробаке)" (табло) — rsvr hi temp (light)
высока т. топлива 1-го двигателя (табло) — (eng) i fuel over temp
заброс т. — sudden rise in temperature
мала т. масла в... — (too) low temperature of oil in...,low oil temperature in...
мала т. масла 1-го двигателя (табло) — (eng) i oil under temp
мала т. топлива 1-го двигателя (табло) — (eng) 1 fuel under temp
(длительный) период воздействия низких температур падение т. на 1 км изменения высоты — (prolonged) cold soak period (at subzero temperature) temperature lapse rate of... ос per kilometre of altitude (height) increase
повышение т. — temperature rise
прирост т. — temperature increase
при т.... ос — at a temperature of... оc
защищать от воздействия высоких температур — protect (smth) from extreme /high/ temperaturesРусско-английский сборник авиационно-технических терминов > температура (темп.)
-
6 контрольная температура окружающего воздуха
контрольная температура окружающего воздуха
Температура окружающего воздуха, при которой устанавливают время-токовые характеристики.
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
reference ambient air temperature
the ambient air temperature on which the time-current characteristics are based
[IEC 60898-1, ed. 1.0 (2002-01)]FR
température de référence de l'air ambiant
température de l'air ambiant sur laquelle sont basées les caractéristiques de temps-courant
[IEC 60898-1, ed. 1.0 (2002-01)]При отсутствии других указаний:
- для тепловых расцепителей значения срабатывания указывают для контрольной температуры (30±2) °С.
Рабочие характеристики расцепителей, зависящие от температуры окружающего воздуха, следует проверять при контрольной температуре (см. 4.7.3 и 5.2Ь), подавая испытательный ток во все фазные полюса расцепителя
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
Для АВО, калиброванных на контрольную температуру, отличную от (23±2) °С, испытание должно проводиться при этой температуре с допуском ±2 °С.
[ ГОСТ Р 50031-99( МЭК 60934-93)]
Номинальный ток (In)
Установленный изготовителем ток, который выключатель способен проводить в продолжительном режиме (см. 4.3.2.14) при указанной контрольной температуре окружающего воздуха.
Стандартная контрольная температура окружающего воздуха 30 °С. Если для данного выключателя используется другое контрольное значение температуры окружающего воздуха, необходимо учитывать ее влияние на защиту кабелей от перегрузки, так как согласно монтажным правилам она также основывается на контрольной температуре окружающего воздуха.
Примечание — Контрольную температуру для защиты кабелей от перегрузок принимают 25 °С по МЭК 369 [5].
[ ГОСТ Р 50345-99( МЭК 60898-95)]
Параллельные тексты EN-RUThe operating characteristic of the breaker with a thermal magnetic trip element changes as the base ambient temperature is adjusted to 40°C.
[LS Industrial Systems]Значения рабочих характеристик автоматических выключателей с теплоэлектромагнитным расцепителем зависят от температуры окружающего воздуха и отличаются от значений, указанных для контрольной температуры 40 °С.
[Перевод Интент]Rated current compensation in accordance with ambient temperature
When normal ambient temperature exceeds the temperature specified in the environment the following formula help to select the applicable current.
[LS Industrial Systems]Изменение номинального тока в зависимости от температуры окружающего воздуха
Если температура окружающего воздуха будет превышать контрольную температуру, то допустимый рабочий ток можно рассчитать по приведенной ниже формуле.
[Перевод Интент]Тематики
EN
- base ambient temperature
- normal ambient temperature
- reference ambient air temperature
- reference temperature
FR
Русско-французский словарь нормативно-технической терминологии > контрольная температура окружающего воздуха
-
7 температура окружающего воздуха (комплектное устройство в металлической оболочке)
-
EN
ambient air temperature (of metal-enclosed switchgear and controlgear)
temperature, determined under prescribed conditions, of the air surrounding the enclosure of metal-enclosed switchgear and controlgear
[IEC 62271-200, ed. 1.0 (2003-11)]FR
température de l'air ambiant (de l'appareillage sous enveloppe métallique)
température, déterminée dans des conditions prescrites, de l'air qui entoure l'enveloppe de l'appareillage sous enveloppe métallique
[IEC 62271-200, ed. 1.0 (2003-11)]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>EN
FR
Русско-английский словарь нормативно-технической терминологии > температура окружающего воздуха (комплектное устройство в металлической оболочке)
-
8 температура окружающего воздуха (комплектное устройство в металлической оболочке)
-
EN
ambient air temperature (of metal-enclosed switchgear and controlgear)
temperature, determined under prescribed conditions, of the air surrounding the enclosure of metal-enclosed switchgear and controlgear
[IEC 62271-200, ed. 1.0 (2003-11)]FR
température de l'air ambiant (de l'appareillage sous enveloppe métallique)
température, déterminée dans des conditions prescrites, de l'air qui entoure l'enveloppe de l'appareillage sous enveloppe métallique
[IEC 62271-200, ed. 1.0 (2003-11)]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>EN
FR
Русско-французский словарь нормативно-технической терминологии > температура окружающего воздуха (комплектное устройство в металлической оболочке)
-
9 температура окружающей среды при внутренней установке
температура окружающей среды при внутренней установке
-
[ ГОСТ Р МЭК 61439.1-2013]Параллельные тексты EN-RU
7.1.1.1 Ambient air temperature for indoor installations
The ambient air temperature shall not exceed +40 °C and its average over a period of 24 h shall not exceed +35 °C.
The lower limit of the ambient air temperature shall be –5 °C.
[BS EN 61439-1:2009]7.1.1.1 Температура окружающей среды при внутренней установке
Температура окружающей среды должна быть не более 40 °С, а средняя температура за 24 ч — не более 35 °С.
Минимальное значение температуры окружающей среды - минус 5 °С.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
EN
Русско-английский словарь нормативно-технической терминологии > температура окружающей среды при внутренней установке
-
10 температура окружающей среды при наружной установке
температура окружающей среды при наружной установке
-
[ ГОСТ Р МЭК 61439.1-2013]Параллельные тексты EN-RU
7.1.1.2 Ambient air temperature for outdoor installations
The ambient air temperature shall not exceed +40 °C and its average over a period of 24 h shall not exceed +35 °C.
The lower limit of the ambient air temperature shall be –25 °C.
[BS EN 61439-1:2009]7.1.1.2 Температура окружающей среды при наружной установке
Температура окружающей среды должна быть не более 40 °С, а средняя температура за 24 ч - не более 35 °С.
Минимальное значение температуры окружающей среды - минус 25 °С.
[ ГОСТ Р МЭК 61439.1-2013]
Тематики
- НКУ (шкафы, пульты,...)
EN
Русско-английский словарь нормативно-технической терминологии > температура окружающей среды при наружной установке
-
11 температура окружающего воздуха (комплектное устройство в пластмассовой оболочке)
- ambient air temperature (of insulation-enclosed switchgear and controlgear)
-
EN
ambient air temperature (of insulation-enclosed switchgear and controlgear)
temperature, determined under prescribed conditions, of the air surrounding the enclosure of insulation-enclosed switchgear and controlgear
[IEC 62271-200, ed. 1.0 (2003-11)]FR
température de l'air ambiant (de l'appareillage sous enveloppe isolante)
température, déterminée dans des conditions prescrites, de l'air qui entoure l'enveloppe de l'appareillage sous enveloppe isolante
[IEC 62271-200, ed. 1.0 (2003-11)]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>EN
- ambient air temperature (of insulation-enclosed switchgear and controlgear)
FR
Русско-английский словарь нормативно-технической терминологии > температура окружающего воздуха (комплектное устройство в пластмассовой оболочке)
-
12 температура окружающего воздуха
температура окружающего воздуха
Определенная в предписанных условиях температура воздуха, окружающего весь коммутационный аппарат или предохранитель.
МЭК 60050(441-11-13).
Примечание. Для коммутационных аппаратов или предохранителей, установленных внутри оболочки, — это температура воздуха вне оболочки.
[ ГОСТ Р 50030. 1-2000 ( МЭК 60947-1-99)]EN
ambient air temperature
the temperature, determined under prescribed conditions, of the air surrounding the complete switching device or fuse
NOTE – For switching devices or fuses installed inside an enclosure, it is the temperature of the air outside the enclosure.
[IEV number 441-11-13 ]FR
température de l'air ambiant
température déterminée dans des conditions prescrites de l'air qui entoure la totalité de l'appareil de connexion ou du fusible
NOTE – Pour des appareils de connexion ou des fusibles installés à l'intérieur d'une enveloppe, c'est la température de l'air à l'extérieur de l'enveloppe
[IEV number 441-11-13 ]Тематики
- аппарат, изделие, устройство...
EN
DE
FR
Русско-французский словарь нормативно-технической терминологии > температура окружающего воздуха
-
13 температура окружающего воздуха (комплектное устройство в пластмассовой оболочке)
-
EN
ambient air temperature (of insulation-enclosed switchgear and controlgear)
temperature, determined under prescribed conditions, of the air surrounding the enclosure of insulation-enclosed switchgear and controlgear
[IEC 62271-200, ed. 1.0 (2003-11)]FR
température de l'air ambiant (de l'appareillage sous enveloppe isolante)
température, déterminée dans des conditions prescrites, de l'air qui entoure l'enveloppe de l'appareillage sous enveloppe isolante
[IEC 62271-200, ed. 1.0 (2003-11)]Тематики
- НКУ (шкафы, пульты,...)
Классификация
>>>EN
- ambient air temperature (of insulation-enclosed switchgear and controlgear)
FR
Русско-французский словарь нормативно-технической терминологии > температура окружающего воздуха (комплектное устройство в пластмассовой оболочке)
-
14 контрольная температура
3.2 контрольная температура (reference temperature), температура падения (temperature collapse): Температура, при которой вершина конуса касается поверхности подставки, на которой он установлен, при нагревании его с заданной скоростью при определенных условиях.
Источник: ГОСТ Р ИСО 1146-2009: Конусы пирометрические контрольные для лабораторного применения. Технические условия оригинал документа
3.2.10.2 контрольная температура (reference ambient air temperature): Температура окружающего воздуха, при которой устанавливают время-токовые характеристики.
Источник: ГОСТ Р 50345-2010: Аппаратура малогабаритная электрическая. Автоматические выключатели для защиты от сверхтоков бытового и аналогичного назначения. Часть 1. Автоматические выключатели для переменного тока оригинал документа
Русско-английский словарь нормативно-технической терминологии > контрольная температура
-
15 повышение температуры
повышение температуры
-
[IEV number 151-16-26]EN
temperature rise
difference between the temperature of the part under consideration and a reference temperature
NOTE – The reference temperature may be for example the ambient air temperature or the temperature of a cooling fluid.
[IEV number 151-16-26]FR
échauffement, m
différence entre la température de la partie considérée et une température de référence
NOTE – La température de référence peut être par exemple la température de l'air ambiant ou celle d’un fluide de refroidissement.
[IEV number 151-16-26]EN
DE
FR
Русско-английский словарь нормативно-технической терминологии > повышение температуры
-
16 увеличение температуры внутри НКУ
увеличение температуры внутри НКУ
-
[Интент]Параллельные тексты EN-RU
Temperature-rise inside assemblies
An excessive temperature-rise inside assemblies represents one of the main problems which are often subject for discussion and to which users pay the most attention.
It is evident that an anomalous heating inside switchgear can jeopardize the safety of people (possible fires) and plants (malfunctioning of the apparatus).
For this reason, the Standard IEC 60439-1 gives a lot of space to the permissible temperature-rise limits in an assembly and to the methods to determine such limits either directly as type test or by analytic extrapolation.
The term type test defines the tests intended to assess the validity of a project according to the expected performances.
Such tests are usually carried out on one or more prototypes and the results of these type tests are assumed to obey to deterministic laws.
Therefore these results can be extended to all the production, provided that it complies with the design of the tested samples.
The type tests prescribed by the Standard IEC 60439-1 include:
• verification of temperature-rise limits
• verification of the dielectric properties
• verification of the short-circuit withstand strength of the main circuits
• verification of the short-circuit withstand strength of the protective circuit
• verification of the effective connection between the exposed conductive parts and the protective circuit
• verification of clearances and creepage distances
• verification of mechanical operation
• verification of the degree of protection
As said above the verification of temperature-rise limits is one of the most critical aspect for an assembly;
the Standard states the temperature-rise limits referred to an average ambient air temperature of ≤35°C which the switchgear complying with the Standard must not exceed (Table 1).
[ABB]Увеличение температуры внутри НКУ
Чрезмерное увеличение температуры внутри НКУ свидетельствует о наличии одной из основных проблем, часто являющихся предметом рассмотрения, и на которые потребители обращают наибольшее влияние.
Совершенно очевидно, что аномальный нагрев элементов внутри НКУ может создать опасность для людей (например, возникновение пожара) и для электроустановки (неправильная работа аппаратуры).
Поэтому стандарт МЭК 60439-1 уделяет большое внимание рассмотрению предельных значений температуры в НКУ и методам их определения, как путем проведения прямых испытаний, так и с помощью экстраполяции значений, полученных в результате испытаний.
Термин типовые испытания определяет испытания, целью которых является доказательство, что испытываемое устройство отвечает определенным техническим условиям.
Такие испытания обычно проводят на одном или нескольких типопредставителях, и считают, что полученные результаты являются детерминированными.
Поэтому их можно применить ко всем изделиям, конструкция которых соответствует испытанным образцам.
В перечень проверок и испытаний, проводимых на НКУ в соответствии со стандартом МЭК 60439-1, входят:
• проверка предельных значений превышения температуры;
• проверка диэлектрических свойств;
• проверка прочности при коротких замыканиях
• проверка прочности при коротких замыканиях цепи защитного заземления
• проверка прочности соединения открытых проводящих частей и цепи защитного заземления
• проверка воздушных зазоров и длин путей утечки;
• проверка механической работоспособности
• проверка степени защиты
Как сказано выше проверка предельных значений превышения температуры является одним из наиболее важных параметров НКУ.
Согласно стандарту превышение предельного значения температуры относительно средней температуры окружающего воздуха, равной 35° C, не должно превышать значений, указанных в таблице 1.
[Перевод Интент]Тематики
- НКУ (шкафы, пульты,...)
EN
Русско-английский словарь нормативно-технической терминологии > увеличение температуры внутри НКУ
-
17 контрольная температура окружающего воздуха
- reference temperature
- reference ambient air temperature
- normal ambient temperature
- base ambient temperature
контрольная температура окружающего воздуха
Температура окружающего воздуха, при которой устанавливают время-токовые характеристики.
[ ГОСТ Р 50345-99( МЭК 60898-95)]EN
reference ambient air temperature
the ambient air temperature on which the time-current characteristics are based
[IEC 60898-1, ed. 1.0 (2002-01)]FR
température de référence de l'air ambiant
température de l'air ambiant sur laquelle sont basées les caractéristiques de temps-courant
[IEC 60898-1, ed. 1.0 (2002-01)]При отсутствии других указаний:
- для тепловых расцепителей значения срабатывания указывают для контрольной температуры (30±2) °С.
Рабочие характеристики расцепителей, зависящие от температуры окружающего воздуха, следует проверять при контрольной температуре (см. 4.7.3 и 5.2Ь), подавая испытательный ток во все фазные полюса расцепителя
[ ГОСТ Р 50030. 2-99 ( МЭК 60947-2-98)]
Для АВО, калиброванных на контрольную температуру, отличную от (23±2) °С, испытание должно проводиться при этой температуре с допуском ±2 °С.
[ ГОСТ Р 50031-99( МЭК 60934-93)]
Номинальный ток (In)
Установленный изготовителем ток, который выключатель способен проводить в продолжительном режиме (см. 4.3.2.14) при указанной контрольной температуре окружающего воздуха.
Стандартная контрольная температура окружающего воздуха 30 °С. Если для данного выключателя используется другое контрольное значение температуры окружающего воздуха, необходимо учитывать ее влияние на защиту кабелей от перегрузки, так как согласно монтажным правилам она также основывается на контрольной температуре окружающего воздуха.
Примечание — Контрольную температуру для защиты кабелей от перегрузок принимают 25 °С по МЭК 369 [5].
[ ГОСТ Р 50345-99( МЭК 60898-95)]
Параллельные тексты EN-RUThe operating characteristic of the breaker with a thermal magnetic trip element changes as the base ambient temperature is adjusted to 40°C.
[LS Industrial Systems]Значения рабочих характеристик автоматических выключателей с теплоэлектромагнитным расцепителем зависят от температуры окружающего воздуха и отличаются от значений, указанных для контрольной температуры 40 °С.
[Перевод Интент]Rated current compensation in accordance with ambient temperature
When normal ambient temperature exceeds the temperature specified in the environment the following formula help to select the applicable current.
[LS Industrial Systems]Изменение номинального тока в зависимости от температуры окружающего воздуха
Если температура окружающего воздуха будет превышать контрольную температуру, то допустимый рабочий ток можно рассчитать по приведенной ниже формуле.
[Перевод Интент]Тематики
EN
- base ambient temperature
- normal ambient temperature
- reference ambient air temperature
- reference temperature
FR
Русско-английский словарь нормативно-технической терминологии > контрольная температура окружающего воздуха
-
18 длительный допустимый ток
- Strombelastbarkeit, f
- Dauerstrombelastbarkeit, f
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Русско-немецкий словарь нормативно-технической терминологии > длительный допустимый ток
-
19 длительный допустимый ток
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Русско-английский словарь нормативно-технической терминологии > длительный допустимый ток
-
20 длительный допустимый ток
- courant permanent admissible, m
- courant admissible, m
(длительный) допустимый ток
Максимальное значение электрического тока, который может протекать длительно по проводнику, устройству или аппарату при определенных условиях без превышения определенного значения их температуры в установившемся режиме
[ ГОСТ Р МЭК 60050-826-2009]
Этот ток обозначают IZ
[ ГОСТ Р 50571. 1-2009 ( МЭК 60364-1: 2005)]EN
(continuous) current-carrying capacity
ampacity (US)
maximum value of electric current which can be carried continuously by a conductor, a device or an apparatus, under specified conditions without its steady-state temperature exceeding a specified value
[IEV number 826-11-13]
ampacity
The current in amperes that a conductor can carry continuously under the conditions of use without exceeding its temperature rating.
[National Electrical Cod]FR
courant (permanent) admissible, m
valeur maximale du courant électrique qui peut parcourir en permanence, un conducteur, un dispositif ou un appareil, sans que sa température de régime permanent, dans des conditions données, soit supérieure à la valeur spécifiée
[IEV number 826-11-13]Ampacity, the term is defined as the maximum amount of current a cable can carry before sustaining immediate or progressive deterioration. Also described as current rating or current-carrying capacity, is the RMS electric current which a device can continuously carry while remaining within its temperature rating. The ampacity of a cable depends on:
- its insulation temperature rating;
- conductor electrical properties for current;
- frequency, in the case of alternating currents;
- ability to dissipate heat, which depends on cable geometry and its surroundings;
- ambient temperature.
Electric wires have some resistance, and electric current flowing through them causes voltage drop and power dissipation, which heats the cable. Copper or aluminum can conduct a large amount of current before melting, but long before the conductors melt, their insulation would be damaged by the heat.
The ampacity for a power cable is thus based on physical and electrical properties of the material & construction of the conductor and of its insulation, ambient temperature, and environmental conditions adjacent to the cable. Having a large overall surface area may dissipate heat well if the environment can absorb the heat.
In a long run of cable, different conditions govern, and installation regulations normally specify that the most severe condition along the run governs the cable's rating. Cables run in wet or oily locations may carry a lower temperature rating than in a dry installation. Derating is necessary for multiple circuits in close proximity. When multiple cables are near, each contributes heat to the others and diminishes the amount of cooling air that can flow past the individual cables. The overall ampacity of the insulated conductors in a bundle of more than 3 must be derated, whether in a raceway or cable. Usually the de-rating factor is tabulated in a nation's wiring regulations.
Depending on the type of insulating material, common maximum allowable temperatures at the surface of the conductor are 60, 75 and 90 degrees Celsius, often with an ambient air temperature of 30°C. In the U.S., 105°C is allowed with ambient of 40°C, for larger power cables, especially those operating at more than 2 kV. Likewise, specific insulations are rated 150, 200 or 250°C.
The allowed current in cables generally needs to be decreased (derated) when the cable is covered with fireproofing material.
For example, the United States National Electric Code, Table 310-16, specifies that up to three 8 AWG copper wires having a common insulating material (THWN) in a raceway, cable, or direct burial has an ampacity of 50 A when the ambient air is 30°C, the conductor surface temperature allowed to be 75°C. A single insulated conductor in air has 70 A rating.
Ampacity rating is normally for continuous current, and short periods of overcurrent occur without harm in most cabling systems. The acceptable magnitude and duration of overcurrent is a more complex topic than ampacity.
When designing an electrical system, one will normally need to know the current rating for the following:- Wires
- Printed Circuit Board traces, where included
- Fuses
- Circuit breakers
- All or nearly all components used
Some devices are limited by power rating, and when this power rating occurs below their current limit, it is not necessary to know the current limit to design a system. A common example of this is lightbulb holders.
[http://en.wikipedia.org/wiki/Ampacity]
Тематики
- электротехника, основные понятия
Синонимы
EN
DE
- Dauerstrombelastbarkeit, f
- Strombelastbarkeit, f
FR
- courant admissible, m
- courant permanent admissible, m
Русско-французский словарь нормативно-технической терминологии > длительный допустимый ток
См. также в других словарях:
Ambient air temperature — Surrounding temperature, such as the outdoor air temperature around a building. California Energy Comission. Dictionary of Energy Terms … Energy terms
ambient air temperature — the temperature of the surrounding air … Dictionary of automotive terms
Total air temperature — is a term used generally in aviation. In other applications it is called stagnation temperature. Total air temperature is measured by a specially designed temperature probe mounted on the surface of the aircraft. The probe is designed to bring… … Wikipedia
air temperature — The various types of temperatures include: i. Indicated air temperature (IAT). The uncorrected reading from the free air temperature gauge. ii. Basic air temperature (BAT). The indicated air temperature corrected for instrument error. iii. True… … Aviation dictionary
static air temperature — The temperature at a point at rest relative to the ambient air … Military dictionary
Temperature examination — Taking a patient s temperature is an initial part of a full clinical examination.Core body temperature is normally carefully controlled within a narrow range so that essential enzymatic reactions can occur. Prolonged temperature elevation… … Wikipedia
Air pollution dispersion terminology — describes the words and technical terms that have a special meaning to those who work in the field of air pollution dispersion modeling. Governmental environmental protection agencies (local, state, province and national) of many countries have… … Wikipedia
Air pollution — from World War II production Smog over … Wikipedia
Temperature measurement — using modern scientific thermometers and temperature scales goes back at least as far as the early 18th century, when Gabriel Fahrenheit adapted a thermometer (switching to mercury) and a scale both developed by Ole Christensen Røemer. Fahrenheit … Wikipedia
Air cycle machine — An air cycle machine (ACM) is the refrigeration unit of the environmental control system used in pressurized turbine powered aircraft. Normally an aircraft has two to three of these machines arranged in a system called a pack . The cooling… … Wikipedia
Air conditioning — The term air conditioning refers to the cooling and dehumidification of indoor air for thermal comfort. In a broader sense, the term can refer to any form of cooling, heating, ventilation or disinfection that modifies the condition of air.… … Wikipedia